Very recently (well: yesterday and today), I made the same non trivial shape for an electronics project, and I tried Fusion360, OnShape and FreeCad.
I basically want to extend the base of an Ikea lantern (Enrum); this require creating an (irregular) octagonal shape, and then creating a slot so that the lantern base can sit on it.
I had some distant memories of modeling stuff in Solidworks for a project back in university, so I'm not starting from zero.
I was able to finish my design in Fusion and redid it in one evening in Onshape. As for Freecad... I still don't know how to do it. Or rather: I could probably do it, but only with so much more googling on how to do basic stuff that it is discouraging to even thing about it.
I think the main issue is that Freecad generally expects you to know exactly what to do, and has very poor affordance.
Let's take the very few steps for instance. In order to create my lantern "shoe", I first need to recreate its base. It's some sort of octagon, so the plan is to draw an octagon, extrude it and then probably repeat the operation with several other octagon to carve a slot for the lamp.
So the very first thing is to create a sketch on the xy place. In both OnShape
In both Fusion and OnShape, the very first menu item in the toolbar is the "create new sketch" one [1][2]. So you can immediately click on it, then chose you plane, then start to draw.
In Freecad though, the first thing in the toolbar are.. the camera controls (which are somehow redundant with the interactive cube view of the main area). In fact, you cannot even create a sketch from the default toolbar; at best you can create a Part.
In order to create a new sketch, you need to go to the dropdown menu. This menu is ordered alphabetically. So the first item is "Arc", then "Draft", then "FEM", ... If you do not know the jargon and/or is just starting out, good luck finding where to next ("what's the difference between Draft and Sketch ?" they would say). And even select Sketcher from the combobox, the first controls you see are still the camera ones. Worse: the "create parts" button from earlier is still there ! [3] And so the "new sketch" button is hidden on the right side of while it's probably the very first thing you want to do.
I basically want to extend the base of an Ikea lantern (Enrum); this require creating an (irregular) octagonal shape, and then creating a slot so that the lantern base can sit on it.
I had some distant memories of modeling stuff in Solidworks for a project back in university, so I'm not starting from zero.
I was able to finish my design in Fusion and redid it in one evening in Onshape. As for Freecad... I still don't know how to do it. Or rather: I could probably do it, but only with so much more googling on how to do basic stuff that it is discouraging to even thing about it.
I think the main issue is that Freecad generally expects you to know exactly what to do, and has very poor affordance.
Let's take the very few steps for instance. In order to create my lantern "shoe", I first need to recreate its base. It's some sort of octagon, so the plan is to draw an octagon, extrude it and then probably repeat the operation with several other octagon to carve a slot for the lamp.
So the very first thing is to create a sketch on the xy place. In both OnShape In both Fusion and OnShape, the very first menu item in the toolbar is the "create new sketch" one [1][2]. So you can immediately click on it, then chose you plane, then start to draw.
[1] https://ibb.co/4YMtDnD
[2] https://ibb.co/ZMCf1Yy
In Freecad though, the first thing in the toolbar are.. the camera controls (which are somehow redundant with the interactive cube view of the main area). In fact, you cannot even create a sketch from the default toolbar; at best you can create a Part.
[3] https://ibb.co/ww791Bd
In order to create a new sketch, you need to go to the dropdown menu. This menu is ordered alphabetically. So the first item is "Arc", then "Draft", then "FEM", ... If you do not know the jargon and/or is just starting out, good luck finding where to next ("what's the difference between Draft and Sketch ?" they would say). And even select Sketcher from the combobox, the first controls you see are still the camera ones. Worse: the "create parts" button from earlier is still there ! [3] And so the "new sketch" button is hidden on the right side of while it's probably the very first thing you want to do.
[3] https://ibb.co/xXrTd6t
And for the very short time I spend trying Freecad, issues like were constant.
There's seems to be some open issues related to this in the Github issues viewer, but no tangible commitment as far as I know.