I love our Daikin mini-splits (came with the house), but as you allude to I've had to become an mini expert on deep cleaning them. They've can get GROSS with mold when used for cooling, and the cursory filter only does so much. That being said, now they stay clean for a few years after a deep cleaning -- though my first few attempt before I refined the process did not stay clean nearly as long. (Proper water pressure and disinfect is key.)
Cleaning basically involves a dedicated cover + drain that diverts water to a bucket, and blasting it with what's effectively a "low power pressure washer" I can use indoors (carefully), and "Lemocide" to properly disinfect... And coil cleaner for the fins. Takes me a good 4+ hours per unit, largely spent preparing the area in case there is any rogue spray. (Though TBH I may be a bit obsessive about getting it right.)
I also had a drain leak as you mentioned -- blasting the drain line with aforementioned "low pressure washer" helped with that. Still a bit gross to deal with. (And learning how to properly disassemble and clean the drip tray is the final thing I've put off leaning for a completely-thorough deep clean... I'm a bit horrified anticipating what I'll find...)
The no 1 reason I bought the Daikin model referenced over the comparable Mitsubishi Electric is that it has the ‘MOULD PROOF’ function. It runs the fan automatically after you have had it in cooling mode, to evaporate the moisture build up from the interior condenser coil, thereby removing the moisture required for the growth of bacteria and mould.
So far, it seems to be working! Better than relying on everyone to manually do it (literally this is the instruction in the Mitsubishi Electric user manual).
That definitely helps and I used to do that in my car where the A/C got smelly pretty quickly. Just run the "fan" for a few minutes after you turn off the A/C and it doesn't get gross.
But one problem is the dust in the house. It will collect on the unit and hold moisture and give a great substrate for mold to grow. But regular cleaning usually takes care of that.
If you live in any kind of area with high humidity you just shifted the mold from the AC unit to the rest of your house. Hell even here in the desert I'm not sure I'd want to use that "feature".
We are talking about the tiny amount of water vapour left on the interior condenser. The idea is to bring that back up to room temperature so that it doesn’t stay there near the dew point. The total amount of water inside the house does not change!
The surface of our planet is so rich in bio material that some tiny amount of mold can be found in almost all unfiltered air. Instead of trying to eliminate all of it, home builders focus on preventing it from growing. Indoors, mold often has everything it needs to grow except standing moisture, so it's important for everything to either dry out or circulate water.
I'd love to see a youtube video of your cleaning methodology.
Most of the videos from HVAC people are... sketchy to the say the least.
I've seen videos where they dismantle the whole indoor unit and leave the coil just hanging from the line set or zip tied to the backplate while they take the fan and drain pan outside to clean.
One easy thing we've found that helps with drain clogs is to use a shop vacuum from outside to suck it out (using a towel/rag to get a good pressure seal). Takes around 5 minutes per drain per cooling season.
I'll try recording something next time I clean one of the units (one needs a deep clean this spring); no promises though. In the meantime, here are some quick notes/resources.
- I cover the electronics in a garage bag held with tape. No need to unscrew the black cover over the power wires to disassemble (I unnecessarily removed this a few times heh).
- I ended up really liking this cleaning shrowd after trying a few; the hard pieces on the sides are key for making it easy to secure nicely, which many others lack: https://www.amazon.com/gp/aw/d/B083S85X97
- I spend more time (like 30min+) spraying the blower wheel so it spins. I alternate spraying with fresh water with spraying diluted "Lemocide" (@10% dilution) from a spray bottle a bunch of times depending how dirty it is. I use this <https://snowjoe.com/products/sun-joe-wa24c-lte-24v-150-psi-m...> which at 100 PSI is 10x stronger than a hand pump sprayer, but 10x weaker than a real pressure washer. I.e. the sweet spot IMO.
- I use foaming coil clean from a can to clean the fins if they're particularly dirty. (WARNING: I have not used in the same cleaning as the Lemocide since I haven't confirmed if they're compatible, so be careful of any reactions if you use both in the same cleaning.)
- I take the outer casings outside for a quick rinse with the hose and dish soap if they're really dusty.
- I tape cheap plastic mirrors at 45 degree angle above the unit so I can see it from above and carefully vacuum the back coil (there are 3 folded over in a U, and you can only see 2 from the front). Otherwise this just accumulates junk and is hard to see. This also really helps with finding the 3x clips at the top of the case that secure it to the back housing.
I may have a few more notes worth sharing at some point; feel free to ping me if you have any specific questions.
Edit: See also this quick video on unclogging the drain line on a Daikin (though I used the sprayer against the tube instead of my mouth...): https://m.youtube.com/watch?v=GDrHe-rli98
We also had a drainage problem after ours were installed. We were very fortunate that another, more experienced tech from the same company came by to follow up on a different issue and took it on themselves to inspect the drain line. It would have leaked into our wall for a long time before it became apparent something was wrong. These units (ours are also Daikin) are a dream to operate but you definitely need to triple-check the drainage on first run.
Cleaning basically involves a dedicated cover + drain that diverts water to a bucket, and blasting it with what's effectively a "low power pressure washer" I can use indoors (carefully), and "Lemocide" to properly disinfect... And coil cleaner for the fins. Takes me a good 4+ hours per unit, largely spent preparing the area in case there is any rogue spray. (Though TBH I may be a bit obsessive about getting it right.)
I also had a drain leak as you mentioned -- blasting the drain line with aforementioned "low pressure washer" helped with that. Still a bit gross to deal with. (And learning how to properly disassemble and clean the drip tray is the final thing I've put off leaning for a completely-thorough deep clean... I'm a bit horrified anticipating what I'll find...)