My favorite part of my touchbar MBP is that it uses USB-C charging. MagSafe is neat, but I don't miss the $80 proprietary charger with a cable that's fixed to the brick and will probably fail if you do anything other than leave it sitting at a desk.
Could this be talking about an iPhone 12 style magsafe with a large pad? Not sure how that would work, you'd have to set your computer on top of it to have enough contact area. Couldn't go on the back of the screen (too thick), so I'm not sure where else it would be. And can it do a high enough wattage? A thin connection like the pencil charging along the side of the computer perhaps, but I'm even more skeptical of wattage with that approach, and it'd mean yet another special cable.
It's certainly true that Apple has been on a big magnets kick lately. MagSafe for iPhones, Pencil charging on the iPad, the Magic Keyboard mounting, and the Apple Watch charger all come to mind.
> My favorite part of my touchbar MBP is that it uses USB-C charging. MagSafe is neat, but I don't miss the $80 proprietary charger with a cable that's fixed to the brick and will probably fail if you do anything other than leave it sitting at a desk.
Magsafe is more than neat, it pretty much solved the major annoyance with laptop power cables (e.g. someone trips on cable, and laptop gets jerked around, eventually damaging something).
Apple likes to toot its own horn way to much, but they deserve tons of credit for Magsafe.
Here's an alternate solution to that problem: build a laptop with 20 hours of battery so that people aren't sitting on the couch with their laptop on the coffee table and a power cord dangling across the living room floor.
I don't have an M1 machine, but the impression I get from people is that "Plug it in overnight at your desk and literally don't worry about its battery running out" is a reasonable thing to do now.
>Here's an alternate solution to that problem: build a laptop with 20 hours of battery so that people aren't sitting on the couch with their laptop on the coffee table and a power cord dangling across the living room floor.
That's a non-solution, since a large majority of the people will use the laptop on their office desk/home desktop, and prefer to have it plugged in while so.
I’d argue that using the laptop at a desk negates the need for a “yank-proof” charger since in most office situations there’s an outlet near or under the desk. Thus the cable won’t be draped across a walkway where someone might trip on it.
Well I’ve got a power strip so I’m not running separate power cords for my computer, a powered USB hub, a lamp, an external hard drive, etc. since that would need a whole bunch of wall outlets that I definitely don’t have.
Having more than two things plugged in at a desk is pretty common situation and literally everyone solves it with a surge protector / power strip. So the laptop cord isn’t dangling across the room, it just runs from the power strip under the desk up the wall to the laptop on the desk. Not a situation where MagSafe would do anything for it.
There are well setup home office desks (I use one, now, didn't always have one), and there are all kinds of office makeshift desk situations, from a simple small ikea desk with a laptop on it and not much else, to the kitch table used as a desk (and cables going to the wall).
Sometimes you're also on the sofa and need to charge, and so on...
Right, but my point in the original comment is that with a 20 hour battery life you wouldn't have the "on the sofa and need to charge" problem anymore.
That's the experience I have with my HP "windows on arm" laptop (one of the launch devices - not the newer more powerful CPU). And of course in the last few rounds of Windows updates they broke "Instant On" which besides battery life was the only other great thing about it. Now it's a slow laptop with great battery life that's frustrating because it takes 20 seconds to turn on.
I too loved MagSafe.
It wasn’t without issues though. The cables didn’t have strain relief so ended up destroyed in certain hands. The other issue may be more region specific - New Zealand has iron sand beaches and fine black sand gets everywhere. Presumably some got into a bag of mine and a very small amount go into the laptop charging ports of multiple laptops. It caused the charger to not connect perfectly and this generated hear and blackened the plug and laptop around the port.
Also if you have small children who put the magsafe connector in their mouth it kills the power brick. If you plug a faulty power brick into a laptop it would sometimes fry the power circuit on the laptop as well.
But I'm 100% in agreement that Apple underdesigned the strain relief on the MagSafe connectors, probably for aesthetic reasons.
I love the design of the MagSafe chargers, you point out a great advantage of them, but sadly they aren't durable. And like the parent comment said, they are expensive. I'm on my second for my current laptop and it's frayed on the end so I'm soon to be on my third. Hopefully a next iteration of MagSafe takes this issue more seriously.
I have a couple MagSafe chargers (for the 15 inch Pro) sitting in a drawer with no Mac that can use them. I can’t be bothered to sell them on eBay, I’d be happy to pass them on if you cover shipping.
> I love the design of the MagSafe chargers, you point out a great advantage of them, but sadly they aren't durable.
I was only talking about the MagSafe connector, which was genius. I agree that they made a few very poor decisions in other parts of the charger (specifically: the cable itself).
That works for a while so long as it's not fraying near the Magsafe connector itself. I eventually threw out my older charger because there was more electrical tape than original coating. My current one started deteriorating right at the connector so it's patched up with epoxy paste to provide strain relief.
I tend to agree that Apple isn't going to retreat on USB-C. That just doesn't make a lot of sense. And whatever minor virtues Magsafe may have, I'm happy when traveling not to have to remember a one-off charger for a laptop. (Which I have forgotten a couple of times.)
I just bought my first macbook, a 2015 model. Looking at the charger, the connection with the magsafe connector looks ok (but definitely weaker than regular barrel jacks), but it seems to me that people get the tendency to unplug it by pulling the cable instead of pulling on the connector. Perhaps that's why they deteriorate rapidly?
I'm sure people do at least now and then. I almost certainly have--are at least I'm not super careful. And I know mine does get accidentally yanked out every now and then.
And I find the covering of the whole cord tends to deteriorate over time, which isn't strain related.
> MagSafe is neat, but I don't miss the $80 proprietary charger with a cable that's fixed to the brick
No law of physics requires a cable with a magnet on one end to not be detachable from the brick on the other end. So while I too do not lament that the cable is no longer affixed to the bricks, I would like Apple to make a magsafe cable that is just not attached that is also not shitty (all those third party USBC attachments have terrible weak magnets that can't even hold themselves in place and I believe can cause power delivery problems).
The other important aspect of USB-C versus MagSafe is that I have USB-C cables hooked up on charges all around my apartment. There's a multi-port charger at my desk, one in the living room, and another in my bedroom. Laptop uses the same charging cable from these as my iPad does. Sometimes I hook another charger up in my kitchen if I'm using my iPad for recipes and want to charge it while I cook. There's another a USB-C charger that lives in my bag, along with a USB-C cable which can also charge my iPad and a power bank.
Even if they make this a new cable with USB-C on one end and NewMagSafe on the other, it'd mean buying a whole bunch of new cables if I wanted to actually use it. And I'd need to buy a whole bunch of chargers too, because the ones I have are mainly a single USB-C port and a couple USB-A ports.
If they want to make yet another proprietary charging cable, fine. I don't really care as long as USB-C charging is still supported.
But the new MacBook would still have USB-C for peripherals right? So it could be, if those still would support USB-PD, that the new MacBook can be charged over magsafe or, if you happen to be near USB-C, using your 'legacy' USB-C charger for 'backwards compatibility'. That would be pretty sweet!!
> I would like Apple to make a magsafe cable that is just not attached that is also not shitty
Bonus points if they make them in a flavor/odor that cats hate. Apple chargers are the only gear my cat has ever chewed on, and I'm not alone in that. I've had to replace 3 cords now. https://www.google.com/search?q=apple+charger+cat+chew
Weird. When my puppy was teething last year, he chewed the ends off a bunch of Apple USB-C and Lightning cables, but didn't touch any other cables (including our non-Apple USB-C and Lightning cables, of which we have plenty.)
Interesting you say that because I've been using a 3rd party USB-C to Magsafe connector to charge my Macbook and it works great. The magnet is even stronger than the OEM ones. Never had a problem with it.
I got it half expecting it to be a piece of crap, but I've been really happy with it so far. Mind you, the power source still needs to have a certain output to charge your Macbook, but it's allowed me to use the same USB-C charger that comes with newer Macbooks with my 2015 Macbook.
EDIT: I hope that was what you were picturing. I suppose someone reading my comment could have interpreted it as a magsafe-to-usb-c connector.
I was talking about the things that add magsafe charging while still allowing data transfer for current usbc macs. I'm simultaneously sad and happy to not be proved wrong. :(
This is what I use with my Intel 16” MBP and M1 Air.
Magnetic Thunderbolt3 USB C Adapter 24Pins USB-C Connector, Support PD 100W Quick Charge, 40Gbp/s Data Transfer and 6K@60Hz 4K@60Hz Video Output Compatible for MacBook Pro/Air and More Type C Devices
https://www.amazon.com/dp/B0896QK2J5/ref=cm_sw_r_cp_api_glc_...
I tried several of those and the magnets were all so bad that they couldn't even support the weight of the cable itself and would lead to fraction-of-a-second disconnects, which in one case led the mac to disable charging on the port (temporarily. the apple store fixed it but I don't know how).
At this point I don't think the reward is worth the risk. But I am glad to hear that at least some of them aren't terrible.
I use it to connect to the dock on my desk, so the cable weight wasn’t an issue, but I can see how the weight of the cable pulling down would disconnect the magnetic connector.
I have always believed that the MagSafe connector should be on the brick. A short, regular USB type C cable to the power brick and a MagSafe connector between the brick and the wall.
Bonus points if the brick incorporates a small hub with additional ports. This would allow you to choose between using a regular USB type C power cable or the proprietary brick with MagSafe built in.
basically anything I own with a lightning or usb micro port gets a magnetic plug (and any usb c device that I dont charge once a day) and becomes an instant magsafe device.
I’m with you about USB-C.
I really like my MagSafe but many of them worn off (just like Apple Lightning cables).
What I really love in USB-C is that it’s a standard!
Brave Apple switched everything to this type of connector. I actually get that. but if you’ve sticked to it for 6 years. keep it.
> I don't miss the $80 proprietary charger with a cable that's fixed to the brick and will probably fail if you do anything other than leave it sitting at a desk.
The Surface charger is a version of MagSafe that's pretty much immune to that.
+1 I really like the interoperability of the USB-C charging on my 2019 Mac. With the same charger I can charge my phone, laptop, headphones and bluetooth speaker. Having to carry only one cable (and one brick) around is great.
Could this be talking about an iPhone 12 style magsafe with a large pad? Not sure how that would work, you'd have to set your computer on top of it to have enough contact area. Couldn't go on the back of the screen (too thick), so I'm not sure where else it would be. And can it do a high enough wattage? A thin connection like the pencil charging along the side of the computer perhaps, but I'm even more skeptical of wattage with that approach, and it'd mean yet another special cable.
It's certainly true that Apple has been on a big magnets kick lately. MagSafe for iPhones, Pencil charging on the iPad, the Magic Keyboard mounting, and the Apple Watch charger all come to mind.