I thought about getting one of those bigger arrays, but I'm concerned that the light they produce may not be as pretty as the 219B even if they have the same color temperature and CRI on paper. The 219C, for example is not, though it's still very nice and capable of quite a bit more output. Output per emitter and overall efficiency aren't major concerns for me: we're talking about around 90W for 6300lm driving 18 219Bs at 1500mA each.
It's also difficult to find the 048Z available in single quantities. I didn't find the R9050 version on Octopart, Other versions cost $50-60, while 219Bs in several tints are readily available from suppliers of DIY flashlight parts for $3/pc. Getting 219Bs and triple or quad copper MCPCBs is easy, and they can be configured for any multiple of about 3 volts, while the 048Z requires a 50 volt power supply.
I was expecting to spend over $100 when all is said and done.
"It's also difficult to find the 048Z available in single quantities"
Just ask Nichia for an engineering sample. :) Boom, free sample if they've got one for you to utilize. I don't know how many Cree, KingBright, Nichia, Osram, and Epistar LEDs I've got just because I ask to test them.
As for the 50V power supply, it'll run on a 48V 1.25A driver. You'll be fine and those are about $20 each.
I have hundreds of dollars worth of flashlights I got by offering to write reviews, but asking for an engineering sample never crossed my mind. I may have to try that.
If you point out to them reviews you've written (some of them mentioning their LEDs favorably) you'll get the engineering sample no problem, I imagine. They like people that promote their products and bend over backwards to get them tiny things that cost them far less than what they're going to get in potential advertising.
It's also difficult to find the 048Z available in single quantities. I didn't find the R9050 version on Octopart, Other versions cost $50-60, while 219Bs in several tints are readily available from suppliers of DIY flashlight parts for $3/pc. Getting 219Bs and triple or quad copper MCPCBs is easy, and they can be configured for any multiple of about 3 volts, while the 048Z requires a 50 volt power supply.
I was expecting to spend over $100 when all is said and done.