I am in constant bewilderment about all of the talk of saving electricity but still so few homes having a very basic device like heat exchanger.
At its very simplest it is just a box where incoming air is being heated by outgoing air without both getting mixed. It is a bunch of pipes, radiators and two fans in a box.
Whether you heat or cool your house, an open window is energy loss. The heat exchanger lets you keep your house nicely ventilated while reducing those losses due to ventilation by something like 90%.
We had one of these installed in the last couple of years and love it. We wanted to keep our CO2 lower, without leaving windows open and introducing dust/whatnot. Works well quantitatively and qualitatively.
FYI the "industry term" for these is an ERV or Energy Recovery Ventilator. (I think I've seen them referred to as Enthalpy Recovery Ventilator -- but I assume that fell out of favor since it's too pedantic for most people heh.)
If you get one, one tip is to ensure the air inlet is covered with a fine mesh screen. This cut the number in bugs in the filter 95%+. Also you can upgrade the filter from what's included to MERV13 or whatnot for better incoming air filtration.
I live in a large apartment (3 adults, 2 children to 1700 square feet). Recently I bought a good CO2 meter (Aranet4) and I really discovered how much you have to ventilate to keep CO2 levels under 1000ppm.
I sort of knew this for a long time and that's why I, for example, always sleep by an open window. But knowing it is one and actually seeing a completely different thing.
So this caused me to start thinking about installing one or more of these boxes in my apartment.
Logically (and ideally), the incoming air and outgoing air would exchange heat until they are at the same temp, which would be in the middle. So I would not expect an efficiency higher than 50% unless there is some special tech I'm not aware?
Imagine you have two very long tubes joined thermally throughout their entire lengths. For the sake of simplicity, no energy is exchanged with the environment, only between the two fluids.
The cold fluid will meet (thermally, in adjacent pipe) more and more hot other fluid and finally as it reaches the end it will meet the hot fluid at exactly the temperature it comes in. If the fluids are flowing slow enough and the thermal bond is good enough, the cold fluid can get heated up as close to the hot fluid temperature as you want.
And the hot fluid will meet colder and colder other fluid until it reaches the coldest at the other side.
The efficiency of heat exchanger could be as close to 100% as you want, in ideal world.
In real world higher efficiency requires larger device and there is a point of diminishing returns. You also get other losses like mechanical losses due to need to pump fluids through pipes (with large surface area), due to need to have turbulent flow (to ensure mixing within pipes) and due to heat loss to the environment.
Counterflow heat exchangers move the air past each other so that the input air hits the exhaust air in reverse order. The last spot the intake air touches is the first place the exhaust gas touches.
I think another part of this is that there is generally a significant moisture content difference between hot and cool air, leading to some additional gains versus thinking in terms of air temperature alone.
When cold air gets heated up the relative humidity gets lower. If you already have very cold winter which tends to be relatively dry -- you should add humidity and this will necessarily cool the air. While this is not strictly necessary, very dry air is not healthy or comfortable. You typically don't need to add humidity when the temperature outside is around freezing but air is very humid.
And conversely, if you live in very hot and humid climate, you need to remove water from incoming air (actually, there is no other way to cool the air). This unfortunately further warms the incoming air and will necessarily lower efficiency of the exchange. Especially because you don't want to remove only minimum humidity -- you probably want to remove enough of it to get to at least 70% for comfort.
So these are extreme climates. In a more moderate climate you can get away with no need to add or remove humidity and you can get as close to 100% efficiency as you want.
At its very simplest it is just a box where incoming air is being heated by outgoing air without both getting mixed. It is a bunch of pipes, radiators and two fans in a box.
Whether you heat or cool your house, an open window is energy loss. The heat exchanger lets you keep your house nicely ventilated while reducing those losses due to ventilation by something like 90%.